Solar Panel

JA Solar high-efficiency modules are installed in ground-mounted power plants, and in residential, commercial and industrial rooftop PV systems in over 120 countries and regions

Features*

• Higher output power
• Excellent low-light performance
• Lower temperature coefficient

*Some features only available in select models.

Astronergy/Chint Solar is a specialized subsidiary of the CHINT group engaged in PV power station development and PV module production. Astronergy is currently one of the largest PV power generation enterprises with 3500MWp of PV Power Stations and 2500MWp module production capacity.

Features*

• Innovational half-cell technology.

Improves the module output, decreases the risk of mirco-crack, enhances the module reliability.

• Reduce shadow loss.

Effectively reduces the effect of shadow on the module surface.

• Reduce internal mismatch loss.

Reduces mismatch loss and improves output.

The Q.ANTUM Technology developed by Q CELLS is based on Passivated Emitter Rear Cell (PERC) technology. PERC techology's benefit is largely due to a reflective layer behind the solar cell, which allows the passivation of the rear side of the solar cell. This state of the art technology allows for capture of previously unused sunlight back into the cell where it can be converted into solar electricity.

Features*

• Q.ANTUM Technology: Low levelised cost of electricity.

Higher yield per surface area, lower BOS costs, higher power classes, and an efficiency rate of up to 20.2 %.

• Innovative all-weather technology.

Optimal yields, whatever the weather with excellent low-light and temperature behaviour.

• Enduring high performance.

Long-term yield security with Anti LID Technology, Anti PID Technology ¹, Hot-Spot Protect and Traceable Quality Tra.Q™.

• Extreme weather rating.

High-tech aluminium alloy frame, certified for high snow (5400 Pa) and wind loads (4000 Pa).

• A reliable investment.

Inclusive 12-year product warranty and 25-year linear performance warranty ².

• State of the art module technology.

Q.ANTUM DUO combines cutting edge cell separation and innovative wiring with Q.ANTUM Technology.

¹ APT test conditions according to IEC/TS 62804-1:2015, method B (−1500 V, 168 h)

² See data sheet on rear for further information.

Canadian Solar is one of the three biggest solar companies in the world by revenue, employing over 8,900 people and operating on 6 continents.

Canadian Solar exists to make a difference – to customers, colleagues, partners, investors and all whose lives they reach. Canadian Solar desire to make a positive difference to the environment and society as a whole. They provide exceptional products and services that meet the specific needs of customers, employees, partners and investors.

Established 2011 in Sydney as a subsidiary of Canadian Solar Inc. (CSI), Canadian Solar (Australia) P/L is your reliable long term partner for solar projects in Australia.

Features*

• Low power loss in cell connection
• Low NMOT: 42 ± 3 °C
  Low temperature coefficient (Pmax): -0.37 % / °C
• Better shading tolerance
• High PTC rating of up to: 93.10 %

Suntech has supplied over 21GW photovoltaic modules to more than 90 countries. As a leading photovoltaic manufacturing company, we specialized in the research and production of crystalline silicon solar cells and modules, and always dedicated ourselves to the improvement of production technology, and also the R&D technology to ensure the most reliable and highest quality to our customers. We aim to become the most trusted PV company through continuous innovation and excellent management.

Features*

• High power output.

Compared to normal module, the power output can increase 5W-10W

• Excellent weak light performance.

More power output in weak light condition, such as haze, cloudy, and morning.

• Extended load tests.

Module certified to withstand front side maximum static test load (5400 Pascal) and rear side maximum static test loads (3800 Pascal)*.

* Please refer to Suntech Standard Module Installation Manual for details.

Longji Silicon Wafer Division is located in Xi'an, Shaanxi. Taking full advantage of regional resources, relying on a healthy financial situation and a strong R & D team, Xi'an is the center for industrial layout and optimization, including Yinchuan and Zhongning in Ningxia, Wuxi in Jiangsu, Chuxiong in Yunnan, Baoshan Helijiang and other places have developed into the world's largest manufacturer of monocrystalline silicon products since 2015, and established a new overseas production base in Malaysia in 2016.

Features*

• Positive power tolerance

(0~+5W) guaranteed

• Slower power degradation

enabled by Low LID Mono PERC technology: first year <2%, 0.55% year 2-25

• Solid PID resistance

ensured by solar cell process optimization and careful module BOM selection

• Reduced resistive loss

with lower operating current

• Higher energy yield

with lower operating temperature

• Reduced hot spot risk

with optimized electrical design and lower operating current

LG Electronics embarked on a solar energy research programme in 1985, using our vast experience in semi-conductors, chemistry and electronics. LG Solar modules are now available in over 50 countries. In 2013, 2015 and 2016 the LG NeON® range won the acclaimed Intersolar Award in Germany, which demonstrates LG Solar’s lead in innovation and commitment to the renewable energy industry. Additionally, LG Solar™ won the Australian Top Brand award in 2016, 2017, 2018 and 2019.
With over 200 lesser known brand panels selling in Australia, LG Solar panels offer a peace of mind solution, as they are backed by an established global brand.

Features*

• Proven Field Performance

LG has been involved in a number of comparison tests of the LG panels against many other brand panels. LG NeON® 2 models are consistently among the best performing in these tests.

• Corrosion Resistance Certification

LG NeON® 2 panels can be installed confidently right up to the coastline as the LG warranty will guarantee these type of installations.

• Multi Anti-reflective Coatings Increase Output

LG Solar™ is using an anti-reflective coating on the panels glass as well as on the cell surface to ensure more light is absorbed in the panel and not reflected. More absorbed light means more electricity generation.

• Improved High Temperature Performance

Solar panels slowly lose ability to generate power as they get hotter. LG NeON® 2, has an improved temperature co-efficient to standard modules, which means in hot weather LG NeON® 2 panels will deliver higher output.

• “CELLO” Technology Increases Power

“CELLO” Multi wire busbar cell technology lowers electrical resistance and increases panel efficiency, giving more power per panel and provides a more uniform look to the panel.

• Low LID

The N-type doping of the NeON® cells results in extremely low Light Induced Degradation (LID) when compared with the standard P-type cells. This means more electricity generation over the life of the panel, as the panel degrades less.

• High Wind Load Resistance

LG panels have a strong double walled frame. When it comes to wind forces (rear load) our panel under test withstood a wind load of 4000 Pascals.

• Enhanced low light performance

LG NeON® 2 panels will give better performance under low light, such as early morning or late afternoon compared to many competing panels.

In 2006, SolarEdge revolutionized the solar industry by inventing a better way to collect and manage energy in PV systems. Today, we are a global leader in smart energy technology. By deploying world-class engineering capabilities and with a relentless focus on innovation, we create smart energy products and solutions that power our lives and drive future progress.

Features*

• Easy installation with panel pre-assembled optimiser
• Optimised energy output by constantly tracking the maximum power point (MPPT) of each panel individually
• Full visibility of system’s performance from panels to grid
• Excellent mechanical loading and shock resistance performance